English
This project concerns a strategy for mitigating the consequences of a severe accident in water-cooled reactors. This strategy meets the “ultimate provisions” requirements formulated following the core meltdown accidents at Fukushima. It consists of spreading the corium in the reactor vessel pit (after it has broken through by melting) and in an adjacent room, then covering it with water to achieve total cooling of the corium before excessive erosion of the concrete floor occurs. In this way, the integrity of the vessel is preserved, guaranteeing the absence of significant radioactive releases. This strategy will be implemented by EDF on all French reactors, and the Czech operator is planning to implement it on the VVER-1000. There is therefore a strong case for collaboration between the two countries on this strategy, the safety assessment of which is delicate. One of the differences between implementation in France and the Czech Republic concerns the layer of sacrificial material added to the concrete floor to promote cooling: in France, this is a silico-limestone concrete, whereas in the Czech Republic, it is planned to use a geopolymer (a mixture of ceramics manufactured without water, which guarantees the absence of potentially flammable hydrogen production). The scientific challenge of this strategy is to assess three phenomena: 1/ the rapid spreading of corium over the entire available surface area 2/ the rate of erosion of the concrete floor 3/ the corium solidification rate, which must be higher than the erosion rate to ensure the success of the strategy. The project involves the study of all three phenomena. Spreading will be studied mainly through numerical simulations by UJV and CFU-FME University, using CFD and simpler models. Observations and experimental measurements will also be carried out to estimate the viscosity of corium (a mixture of molten core materials and molten concrete). In particular, CVR will study mixtures obtained with a geopolymer (prepared by IIC) in place of concrete. CEA will carry out viscosity measurements. The erosion of different types of concrete is relatively well known, but the erosion of geopolymers is not. This will be studied in the CVR device (cold crucible). Corium will be poured onto a layer of geopolymer, and the erosion kinetics will be estimated by taking samples at regular intervals. The flow of gas produced will also be assessed, as it plays a role in cooling. Models will be developed by IRSN to represent geopolymer erosion. Corium solidification will be studied by IRSN. Models already applicable to concrete-containing mixtures will be extended to geopolymer-containing mixtures. Particular attention will be paid to underwater crust cracking phenomena, using thermomechanical calculations. Measurements will be carried out by CEA and CVR. All the models will be integrated into the ASTEC software, capable of simulating a complete severe accident sequence on a reactor. This will make it possible to assess the respective impacts of the three phenomena studied as a function of accident scenarios and system characteristic times (full spread time, water flooding time, etc.), in order to estimate the safety margin. At this stage, exchanges and shared thinking between Czech and French partners will lead to a consensual approach to phenomenology and safety assessment methodology for this strategy. This harmonization is an important objective for regulators and technical support organizations (TSOs) in Europe. At the end of the project, it should be possible to present the scientific basis of this strategy and the various possible options (sacrificial material, spreading surface, characteristic times, etc.).
