English
The PAF project concerns the use of spraying systems as a means of protecting buildings against external fire: protection of structures, facades or dwellings. In this context, water is used in divided form, forming a curtain or running over the surfaces to be protected. This project will enable progress to be made in predicting the action of sprays and optimizing injection parameters (droplet size, flow rates, type aspersion, spray curtain or impacting spray, spray timing). Planned actions include laboratory-scale modeling and experimentation to evaluate and improve models describing the fundamental actions of a spray (evaporation, flame and surface cooling, interaction with flame dynamics, flame radiation attenuation). Applications will then be studied at full scale, taking advantage of the partners' technical platforms. The change of scale will therefore also be at the heart of the project. The PAF project brings together two laboratories (LEMTA and SPE) specialized in spraying and fire, and two companies (EFECTIS and STME Fire) specialized in the application of fire-fighting technologies. This consortium will benefit from exchanges, already initiated, with international partners with recognized modeling skills (NIST and Ghent University). Experimentally, the work will include an initial task aimed at finely characterizing the sprays in terms of granulometry, velocity and mass distribution of the droplets. The action of sprays, in terms of radiative attenuation and cooling of impacted surfaces, will be studied at laboratory scale on the LEMTA test platform. The effectiveness of the sprays will then be evaluated at full-scale on the Efectis platform in St Yan (protection of structures and facades) and the SPE laboratory's EXPLORII platform (protection of a dwelling subjected to a vegetation fire). The protection provided by different types of spraying systems (descending or ascending water curtain, water jet projected onto the roof) will be quantified and simulated. These different tests are complementary. The laboratory scale enables us to control most of the experimental conditions (imposed heat flux, controlled wind) and to characterize them with a fine metrology. The measurements will enable progress to be made in the fine modeling of sprays: description of the spray footprint, droplet concentrations, their evolution in the environment close to the fire, their evaporation, and the cooling induced on flames and walls. Full-scale tests will make it possible to use "real" spray systems, set up by partner STME-FIRE. These full-scale applications will then be simulated to assess the ability to predict the effectiveness of protection systems. FDS (Fire Dynamics Simulator) will be the simulation code used. It will be further developed in partnership with the code's developers and users, with a view to overcoming the weaknesses identified in the sprinkler field. The outcomes of the project will be both academic and applicative. Firstly, we aim to gain fundamental knowledge of spray dynamics, the interaction of sprays with fire and with surfaces, how to take water runoff into account, and our ability to simulate these actions. The application part of the project will contribute to the prediction and optimization of the action of a spray-based protection system. All this knowledge will be made available to fire protection scientists and operators, via open databases, publications and conference papers, as well as through the drafting and distribution of a guide to design assistance and best practices for ensuring the performance of active fire protection solutions.
